TYPE-2 Lightweight Single Jacket Forestry Hose, 1.5"
Key Fire Hose Type-2 fire hose is constructed with superior quality materials. NFPA 1961 and forestry spec 5100-187 standards are strictly observed in production of the assembly, in order to ensure its quality and durability. Type-2 will have a potential service life warranty of five years barring mistreatment that would render it unfit for service. The jackets are woven evenly to be free of defects, including knots, lumps, or unsightly disfigurations that could jeopardize the integrity of the hose assembly. The warp yarn consists of ring spun polyester yarn. The filler yarns are constructed of high strength, low elongation, filament polyester to reduce weight and increase flexibility. The jacket construction is a 1-2 woven twill pattern with the 2 over-crossing on the exterior of the jacket. The lining is a single-ply extruded tube of synthetic polyurethane to resist zone. The polyurethane tube will adhere to the jacket to prevent delamination. The finished product will meet and exceed all potable water Mil-H-24606B standards for the manufacturing of lightweight fire hose. The use of the polyurethane lined fire hose is designed to increase packing ability and applications where lightweight fire hose is desired. The minimum burst test pressure on Key Type 2 diameters shall be 900 PSI/62 Bar. Service test pressures are stenciled on the hose to be in accordance with current minimum requirements of NFPA 1962. Couplings shall meet 5100-108 minimum requirements.
• Made in the U.S.A.
• USDA first article tested and approved
• 5100-187c Type 2 compliant
• Ring spun polyester to aid abrasion resistance
• Designed for rigorous forestry applications
• Super lightweight construction
• Threaded or quarter-turn quick connect couplings
|Unit of Measurement||Each|
|Material||Ring Spun Polyester|
|Brand||TYPE II, SINGLE JACKET|
|Manufacturer||Key Fire Hose|
|Special Features||5-Year Warranty|
|Product Type||Fire Hose|
|Quantity Per Box||1|