Lightweight double jacket, rubber lined attack hose, 1"
Key Fire Hose is manufactured to be of superior quality and workmanship. The hose shall withstand the rough usage of front line firefighting. Double jacket hose is manufactured to be tightly woven with filament polyester yarn in the filler, and ring spun polyester yarn in the warp of both the inside and outside jackets. The hose shall be resistant to most chemicals and petrol products, and resist deterioration due to exposure to UV-rays and ozone. It shall not be affected by rot or mildew. The minimum burst test pressure, when tested in accordance to NFPA 1961, on all ECO-10 diameters up to 3" shall be 1200 PSI/82 Bar. The service test pressures will be stenciled on the hose and shall be in accordance with current minimum requirements of NFPA 1962. ECO-10 is coupled with 6061-T6 extruded aluminum threaded couplings. Fire hose manufactured to this specification meet all performance requirements of NFPA 1961 and Underwriter's Laboratories standards.
• Made in the U.S.A.
• 100% synthetic all polyester double jacket
• 100% mildew resistant
• Thin wall high tensile EPDM rubber liner
• UL Listed
• NFPA Certified
• Double dip Key-Lok process available
• 25% stronger jacket
• 25% lighter
• Special reverse twill construction to reduce friction loss by 25%
• 10 year warranty
|Manufacturer||Key Fire Hose|
|Unit of Measurement||Each|
|Special Features||10-Year Warranty|
|Quantity Per Box||1|