DURA-FLOW Rubber Covered Attack Hose, 1"
Key Fire Hose is made from 100% high tenacity synthetic polyester yarn, circularly woven and completely protected by a through-the-weave extruded PVC/Nitrile rubber, forming a single homogeneous construction without the use of glues or adhesives of any type. Dura-Flow features a raised thick rib construction to aid abrasion resistance. Dura-Flow exceeds requirements of NFPA 1961. The tensile strength of the lining and cover shall not be less than 1200 PSI and ultimate elongation is 400% minimum. This hose withstands 10,000 cycles on the Taber Abrasion Machine. Dura-Flow Hose has a capability of use down to -35°F with no apparent damage to cover, reinforcement or lining when subjected to the cold bending test. Exposure to sea water and contamination by most chemical substances, hydrocarbons, oils, alkalis, acids and greases will no effect on the short or long term performance of the hose. The hose, when subjected to a static pressure of 100 PSI, is capable of withstanding a surface temperature of 1200°F for a minimum of one minute without rupture or damage to the synthetic reinforcement. The minimum burst test pressure, when tested in accordance to NFPA 1961, on all Dura Flow diameters is 900 PSI/62 Bar. Dura-Flow hose is coupled with 6061-T6 USA manufactured extruded aluminum threaded couplings. Certified to NFPA 1962.
• Made in the U.S.A.
• Nitrile/PVC through-the-weave rubber covered construction
• UL Listed
• NFPA compliant attack hose
• Heat resistant
• Chemical resistant
• Maintenance free
• Raised thick rib construction to aid abrasion resistance
|Manufacturer||Key Fire Hose|
|Unit of Measurement||Each|
|Special Features||10-Year Warranty|
|Material||Nitrile & PVC|
|Quantity Per Box||1|