Key Fire Hose is manufactured of superior quality and workmanship. The hose shall withstand the rough usage of front line firefighting. This double jacket is manufactured to of tightly woven with filament polyester yarn in the filler and ring spun polyester yarn in the warp of both the inside and outside jackets. . This hose is resistant to most chemicals and petrol products, and resists deterioration due to exposure to UV-rays and ozone. It will not be affected by rot or mildew. The inside and outside jackets are manufactured with a minimum pick count of 9.5 picks per inch for increased strength and abrasion resistance. The inside jacket is manufactured using a reverse twill process to reduce friction loss. The lining is a single-ply extruded tube of synthetic polyurethane to resist ozone. The polyurethane tube adheres to the jacket to prevent delamination. The finished product will meet and exceed all potable water MIL-H-24606B & NSF-61 standards for potable water use hose. The use of the polyurethane lined fire hose is designed to increase packing ability and reduce weight for high rise firefighting applications where light weight fire hose is desired. The minimum burst test pressure on all Key-Lite diameters up to 3" shall be 1200 PSl/82 Bar. Minimum burst test requirements for the 4" diameter shall be 900 PSl/62 Bar. The service test pressure will be stenciled on the hose shall be in accordance with current minimum requirements of NFPA 1962. Key-Lite is coupled with 6061-T6 extruded aluminum threaded couplings or forged storz. Certified to meet and exceed NFPA 1961 and MIL-H-24606 standards.
• Made in the U.S.A.
• 100% synthetic all polyester double jacket
• 100% mildew resistant
• Polyurethane liner
• Liner NSF-61 compliance
• Attack hose designed for Hi-Rise applications
• Special reverse twill construction to reduce friction loss
• 5 year warranty against delamination of liner
|Quantity Per Box||1 PER BOX|
|Unit of Measurement||Each|
|Manufacturer||Key Fire Hose|
|Special Features||5-Year Warranty|